| Mobile | RSS

6×6x5 Sheet Metal Wye For Dust Collectors

May 6th, 2010 | No Comments | Posted in Dust Collector

This is for 1 24 gauge sheet metal wye. The size is 6″ x 6″ x 5″.The wye is at a 45 degree angle. These are sold for dust collectors. I use them in my shop with 10 hp cyclones. They are crimped on one end for insertion into pipes or other fittings. …   Read More

Leave a Reply 41 views, 1 so far today |
Tags: , , , , , , , ,
  • 6×5x5 Sheet Metal Wye For Dust Collectors
    This is for a 24 gauge sheet metal wye. The size is 6″ x 5″ x 5″. The wye is at a 45 degree angle. These are sold for dust collectors. I use them in my shop with 10 hp cyclones. They are crimped on one end for insertion into pipes or ...
  • 5×4x4 Sheet Metal Wye For Dust Collectors
    These are 24 gauge sheet metal wyes. The size is 5″ x 4″ x 4″ the wye is at a 45 degree angle. These are sold for dust collectors, I use them in my shop with 10 hp cyclones. They are crimped on one end for insertion into pipes or othe...
  • 10×10x10 Sheet Metal Wye For Dust Collectors
    These are 24 gauge sheet metal wyes. The size is 10″ x 10″ x 10″ the wye is at a 45 degree angle. These are sold for dust collectors, I use them in my shop with 10 hp cyclones. They are crimped on one end for insertion into pipes or o...
  • 8×8x4 Sheet Metal Wye For Dust Collectors
    These are 24 gauge sheet metal wyes. The size is 8″ x 8″ x 4″ the wye is at a 45 degree angle. These are sold for dust collectors, I use them in my shop with 10 hp cyclones. They are crimped on one end for insertion into pipes or othe...
  • 6×6x4 Sheet Metal Wye For Dust Collectors
    These are 24 gauge sheet metal wyes. The size is 6″ x 6″ x 4″ the wye is at a 45 degree angle. These are sold for dust collectors, I use them in my shop with 10 hp cyclones. They are crimped on one end for insertion into pipes or othe...
  • 5×5x5 Sheet Metal Wye For Dust Collectors
    This is for a 24 gauge sheet metal wye. The size is 5″ x 5″ x 5″. The wye is at a 45 degree angle. These are sold for dust collectors. I use them in my shop with 10 hp cyclones. They are crimped on one end for insertion into pipes or ...
  • 5×5x4 Sheet Metal Wye For Dust Collectors
    This is for a 24 gauge sheet metal wye. The size is 5″ x 5″ x 4″. The wye is at a 45 degree angle. These are sold for dust collectors. I use them in my shop with 10 hp cyclones. They are crimped on one end for insertion into pipes or ...
  • 10″ X 9″ Sheet Metal Taper Reducer For Dust Collectors
    These are 26 gauge sheet metal taper reducers. The size is 10″ x 9″. These are sold for dust collectors. I use them in my shop with 10 hp cyclones. They are not crimped on either end for insertion into pipes or other fittings. The winning b...
  • 10″ X 8″ Sheet Metal Taper Reducer For Dust Collectors
    These are 26 gauge sheet metal taper reducers. The size is 10″ x 8″. These are sold for dust collectors. I use them in my shop with 10 hp cyclones. They are not crimped on either end for insertion into pipes or other fittings. The winning b...
  • 5″ X 4″ Sheet Metal Taper Reducer Dust Collectors Duct
    These are 26 gauge sheet metal taper reducers. The size is 5″ x 4″. These are sold for dust collectors. I use them in my shop with 10 hp cyclones. They are not crimped on either end for insertion into pipes or other fittings. The winning bi...

Comments are closed.


Recent Post

Most Popular

Popular Today